Model adi_engineering_pronghorn_sbc250

get_appStock Image

get_appSnapshot Stock Image get_appSnapshot Upgrade Image

Flashing via TFTP

  • Download the factory firmware image offered above to your Computer.
  • Configure a computer with static IP /24 and a TFTP server. On Debian or Ubuntu you can use either the tftpd-hpa or tftpd server packages.
  • Rename the downloaded firmware image to `` and place it in the tftp server’s root directory. (If using tftpd-hpa this is /var/lib/tftpboot/; if tftpd, it is /srv/tftp/) You can test that the file is downloadable with tftp localhost and get .
  • Connect the computer to one of the router’s Ethernet ports while the router is off. Press and keep pressed the router’s reset button and power it up. After about 7-10 seconds release the reset button. The power LED will flicker rapidly for ~3 seconds, indicating download of the firmware file.
  • The router will write the firmware to flash during ~40 more seconds of occasional power LED blinks, and then will reboot by itself, ready for use.

Comments

General

sysupgrade not supported, re-install necessary

WLAN

2nd PCI slot available

Installation

For installation you also need ixp4xx-generic-squashfs.img

ADI Engineering Pronghorn SBC250
Latest release 18.06.2 Discontinued
Device Type WiFi Router
Vendor ADI Engineering
Model Pronghorn SBC250
Flash 16 MB
RAM 64 MB
CPU Intel IXP425 (ixp4xx)
1 x 533MHz
Ethernet ports 0 x GBit — 2 x 100Mbit
WiFi

2.4Ghz: b/g

5Ghz: a
Bootloader RedBoot
Power Supply 5 VDC, 2.5 A or PoE
Serial check_circle
Additional resources