Model tp-link_archer_c2_ac750
Installation
Flashing via webinterface
- Download the factory firmware image offered above to your Computer.
- Connect your Computer to a LAN port of the TP-link. If the configuration was not changed, the DHCP on the router will give you a 192.168.0.X address and the TP-link web administration page is 192.168.0.1. (User: admin, Password: admin) Under System Tools select Firmware Upgrade. Browse to the previously downloaded ** file. Click Upgrade.
- If the Webinterface tells you You have no authority to access this router! that’s because your browser does not send the correct HTTP referer header. Disable addons or use a different browser.
- Connect to 192.168.1.1 with your web browser
- Set your password and configure the router through the web UI. Basic Config Congratulations! You just installed OpenWrt on your Router!
Flashing via TFTP
- Download the factory firmware image offered above to your Computer.
- Configure a computer with static IP /24 and a TFTP server. On Debian or Ubuntu you can use either the tftpd-hpa or tftpd server packages.
- Rename the downloaded firmware image to `` and place it
in the tftp server’s root directory. (If using tftpd-hpa this is
/var/lib/tftpboot/
; if tftpd, it is/srv/tftp/
) You can test that the file is downloadable withtftp localhost and get
. - Connect the computer to one of the router’s Ethernet ports while the router is off. Press and keep pressed the router’s reset button and power it up. After about 7-10 seconds release the reset button. The power LED will flicker rapidly for ~3 seconds, indicating download of the firmware file.
- The router will write the firmware to flash during ~40 more seconds of occasional power LED blinks, and then will reboot by itself, ready for use.
Comments
General
Device and firmware links for US variant. Use site features (footer, bottom left) to change location.
Recovery
TFTP-Recoveryname: ArcherC2V1_tp_recovery.bin
Installation
TFTP-Recoveryname: ArcherC2V1_tp_recovery.bin
TP-Link Archer C2 AC750 v1 | |
---|---|
Latest release | snapshot Discontinued |
Device Type | WiFi Router |
Vendor | TP-Link |
Model | Archer C2 AC750 |
Flash | 8 MB |
RAM | 64 MB |
CPU | MediaTek MT7620A (ramips) 1 x 580MHz |
Ethernet ports | 5 x GBit — 0 x 100Mbit |
WiFi |
2.4Ghz: b/g/n 5Ghz: a/n/ac |
USB | 1x 2.0 |
Switch | Realtek RTL8367RB |
Bootloader | U-Boot |
Power Supply | 12 VDC, 1.5 A |
Serial | check_circle |
Additional resources |