Model tp-link_tl-wr1043nd_v1

Installation

Flashing via webinterface

• Download the factory firmware image offered above to your Computer.
• Connect your Computer to a LAN port of the TP-link. If the configuration was not changed, the DHCP on the router will give you a 192.168.0.X address and the TP-link web administration page is 192.168.0.1. (User: admin, Password: admin) Under System Tools select Firmware Upgrade. Browse to the previously downloaded openwrt-18.06.2-ar71xx-generic-tl-wr1043nd-v1-squashfs-factory.bin file. Click Upgrade.
• If the Webinterface tells you You have no authority to access this router! that’s because your browser does not send the correct HTTP referer header. Disable addons or use a different browser.
• Connect to 192.168.1.1 with your web browser
• Set your password and configure the router through the web UI. Basic Config Congratulations! You just installed OpenWrt on your Router!

Comments

WLAN

3x3