Model ubiquiti_unifi_ac_mesh_pro

Flashing via TFTP

  • Download the factory firmware image offered above to your Computer.
  • Configure a computer with static IP /24 and a TFTP server. On Debian or Ubuntu you can use either the tftpd-hpa or tftpd server packages.
  • Rename the downloaded firmware image to `` and place it in the tftp server’s root directory. (If using tftpd-hpa this is /var/lib/tftpboot/; if tftpd, it is /srv/tftp/) You can test that the file is downloadable with tftp localhost and get .
  • Connect the computer to one of the router’s Ethernet ports while the router is off. Press and keep pressed the router’s reset button and power it up. After about 7-10 seconds release the reset button. The power LED will flicker rapidly for ~3 seconds, indicating download of the firmware file.
  • The router will write the firmware to flash during ~40 more seconds of occasional power LED blinks, and then will reboot by itself, ready for use.
Ubiquiti UniFi AC Mesh Pro
Latest release snapshot
Device Type WiFi AP
Vendor Ubiquiti
Model UniFi AC Mesh Pro
Flash 16 MB
RAM 128 MB
CPU Qualcomm Atheros QCA9563-AL3A (ar71xx-ath79)
1 x 775MHz
Ethernet ports 2 x GBit — 0 x 100Mbit
WiFi

2.4Ghz: b/g/n

5Ghz: a/n/ac
Switch Atheros AR8337
Bootloader U-Boot
Power Supply PoE 802.3af
Serial cacel
Additional resources